日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Influence of Infill Density on the Fatigue Performance of FDM-Manufactured Orthopaedic Plates

填充密度对FDM制造的骨科钢板疲劳性能的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma19040816
Milovanović, Aleksa; Sedmak, Simon; Sedmak, Aleksandar; Vučetić, Filip; Monkova, Katarina
发表日期：2026
文献求助 收藏

Research into the Influence of Volume Fraction on the Bending Properties of Selected Thermoplastic Cellular Structures from a Mechanical and Energy Absorption Perspective

从力学和能量吸收角度研究体积分数对选定热塑性多孔结构弯曲性能的影响

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17202795
Monkova, Katarina; Monka, Peter Pavol; Godec, Damir; Torokova, Monika
发表日期：2025
文献求助 收藏

A Preliminary Study of the Effect of 3D Printing Orientation on Mechanical Properties and Fracture of Samples Made from AlSi10Mg

3D打印方向对AlSi10Mg合金样品力学性能和断裂性能影响的初步研究

期刊:Materials
影响因子:3.2
doi:10.3390/ma18235294
Monkova, Katarina; Bouzouni, Marianthi; Pantazopoulos, George A; Toulfatzis, Anagnostis I; Papadopoulou, Sofia
3D/类器官
发表日期：2025
文献求助 收藏

Researching on the Effect of Input Parameters on the Quality and Manufacturability of 3D-Printed Cellular Samples from Nylon 12 CF in Synergy with Testing Their Behavior in Bending

研究输入参数对尼龙12 CF 3D打印蜂窝样品质量和可制造性的影响，并测试其弯曲性能

期刊:Polymers
影响因子:4.9
doi:10.3390/polym16101429
Koroľ, Martin; Török, Jozef; Monka, Peter Pavol; Baron, Petr; Mrugalska, Beata; Monkova, Katarina
3D/类器官
发表日期：2024
文献求助 收藏

Numerical and Experimental Modal Analysis of a Gyroid Inconel 718 Structure for Stiffness Specification in the Design of Load-Bearing Components

用于承载部件设计中刚度规范的螺旋形Inconel 718结构的数值和实验模态分析

期刊:Materials
影响因子:3.2
doi:10.3390/ma17143595
Monkova, Katarina; Braut, Sanjin; Monka, Peter Pavol; Skoblar, Ante; Pollák, Martin
发表日期：2024
文献求助 收藏

Tensile Properties of Four Types of ABS Lattice Structures-A Comparative Study

四种ABS晶格结构的拉伸性能对比研究

期刊:Polymers
影响因子:4.9
doi:10.3390/polym15204090
Monkova, Katarina; Monka, Peter Pavol; Hricová, Romana; Hausnerova, Berenika; Knapčíková, Lucia
发表日期：2023
文献求助 收藏

Effect of Crosshead Speed and Volume Ratio on Compressive Mechanical Properties of Mono- and Double-Gyroid Structures Made of Inconel 718

十字头速度和体积比对Inconel 718单螺旋和双螺旋结构压缩力学性能的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma16144973
Monkova, Katarina; Monka, Peter Pavol; Pantazopoulos, George A; Toulfatzis, Anagnostis I; Šmeringaiová, Anna; Török, Jozef; Papadopoulou, Sofia
发表日期：2023
文献求助 收藏

Mechanical Vibration Damping and Compression Properties of a Lattice Structure

晶格结构的机械振动阻尼和压缩特性

期刊:Materials
影响因子:3.2
doi:10.3390/ma14061502
Monkova, Katarina; Vasina, Martin; Zaludek, Milan; Monka, Peter Pavol; Tkac, Jozef
发表日期：2021
文献求助 收藏