日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Printability and Performance Metrics of New-Generation Multifunctional PMMA/Antibacterial Blend Nanocomposites in MEX Additive Manufacturing

MEX增材制造中新一代多功能PMMA/抗菌共混纳米复合材料的可打印性和性能指标

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17030410
Petousis, Markos; Nasikas, Nektarios K; Papadakis, Vassilis; Valsamos, Ioannis; Gkagkanatsiou, Katerina; Mountakis, Nikolaos; Argyros, Apostolos; Dimitriou, Evgenia; Michailidis, Nikolaos; Vidakis, Nectarios
多发性骨髓瘤
发表日期：2025
文献求助 收藏

Printability Metrics and Strain Rate Sensitivity of Multirole PVDF in Extrusion-Based Additive Manufacturing

基于挤出增材制造的多通道PVDF的可打印性指标和应变速率敏感性

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17223085
Vidakis, Nectarios; Nasikas, Nektarios K; Michailidis, Nikolaos; Spyridaki, Maria; Mountakis, Nikolaos; Argyros, Apostolos; Papadakis, Vassilis M; Moutsopoulou, Amalia; Petousis, Markos
发表日期：2025
文献求助 收藏

Valorization of Polymethylmethacrylate Scrap Reinforced with Nano Carbon Black with Optimized Ratio in Extrusion-Based Additive Manufacturing

在挤出式增材制造中，以优化比例增强纳米炭黑的聚甲基丙烯酸甲酯废料的增值利用

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17101383
Michailidis, Nikolaos; Vidakis, Nectarios; David, Constantine; Sagris, Dimitrios; Papadakis, Vassilis M; Argyros, Apostolos; Mountakis, Nikolaos; Spyridaki, Maria; Petousis, Markos
表观遗传
发表日期：2025
文献求助 收藏

Extrudability, printability, and strain rate sensitivity metrics of lightweight thermoplastic polyimide (PI) in material extrusion (MEX) additive manufacturing

轻质热塑性聚酰亚胺（PI）在材料挤出（MEX）增材制造中的挤出性、可打印性和应变速率敏感性指标

期刊:RSC Advances
影响因子:4.6
doi:10.1039/d5ra05290d
Vidakis, Nectarios; Michailidis, Nikolaos; Mountakis, Nikolaos; Spyridaki, Maria; Argyros, Apostolos; Efstratiadis, Vasileios Stratiotou; Stratakis, Emmanuel; Petousis, Markos
发表日期：2025
文献求助 收藏

Optimization of Roughness, Dimensional Conformity, and Porosity of 3D-Printed ASA with MEX: Impact of Critical Process Control Parameters

利用MEX技术优化3D打印ASA的粗糙度、尺寸一致性和孔隙率：关键工艺控制参数的影响

期刊:ACS Omega
影响因子:4.3
doi:10.1021/acsomega.5c07437
Sagris, Dimitrios; David, Constantine; Petousis, Markos; Nasikas, Nektarios K; Mountakis, Nikolaos; Spyridaki, Maria; Vidakis, Nectarios
3D/类器官
发表日期：2025
文献求助 收藏

The Impact of MEX 3D Printing Key Control Settings on the Rheology and DMA Response of Bacteria-Derived PHA

MEX 3D打印关键控制设置对细菌衍生PHA流变学和DMA响应的影响

期刊:ACS Omega
影响因子:4.3
doi:10.1021/acsomega.5c04386
Petousis, Markos; Michailidis, Nikolaos; Mountakis, Nikolaos; Argyros, Apostolos; Spyridaki, Maria; Maravelakis, Emmanuel; Nasikas, Nektarios; Vidakis, Nectarios
3D/类器官
微生物学
发表日期：2025
文献求助 收藏

Optimization of the Mechanical Response in MEX Additive Manufacturing of Thermoplastic Polyimide (PI): The Impact of Key Process Control Settings

热塑性聚酰亚胺（PI）MEX增材制造中力学响应的优化：关键工艺控制参数的影响

期刊:ACS Omega
影响因子:4.3
doi:10.1021/acsomega.5c08277
Petousis, Markos; Mountakis, Nikolaos; Zavos, Anastasios; Ntintakis, Ioannis; Moutsopoulou, Amalia; Spyridaki, Maria; Nasikas, Nektarios K; Maravelakis, Emmanuel; Vidakis, Nectarios
发表日期：2025
文献求助 收藏

Optimization of Silicon Nitride Nanopowder Content in Polyamide 12 (PA12) in Extrusion-Based Additive Manufacturing

挤出式增材制造中聚酰胺12 (PA12) 中氮化硅纳米粉末含量的优化

期刊:Nanomaterials
影响因子:4.3
doi:10.3390/nano16010047
Petousis, Markos; Korlos, Apostolos; Michailidis, Nikolaos; Papadakis, Vassilis M; Argyros, Apostolos; Mountakis, Nikolaos; Spyridaki, Maria; Maniadi, Athena; Moutsopoulou, Amalia; Vidakis, Nectarios
发表日期：2025
文献求助 收藏

Cyclic Economy-Driven Composites for Material Extrusion Three-Dimensional Printing: Poly(methyl methacrylate) from Recycled Scrap with Optimized Biomass-Derived Biochar Filler Content

循环经济驱动的复合材料在挤出三维打印中的应用：以回收废料为原料，优化生物质衍生生物炭填料含量的聚甲基丙烯酸甲酯

期刊:ACS Omega
影响因子:4.3
doi:10.1021/acsomega.5c02525
Vidakis, Nectarios; Michailidis, Nikolaos; Kalderis, Dimitrios; Maravelakis, Emmanuel; Papadakis, Vassilis; Argyros, Apostolos; Mountakis, Nikolaos; Spyridaki, Maria; Nasikas, Nektarios; Petousis, Markos
发表日期：2025
文献求助 收藏

Investigation of the Effectiveness of Silicon Nitride as a Reinforcement Agent for Polyethylene Terephthalate Glycol in Material Extrusion 3D Printing

研究氮化硅作为聚对苯二甲酸乙二醇酯增强剂在材料挤出3D打印中的有效性

期刊:Polymers
影响因子:4.9
doi:10.3390/polym16081043
Michailidis, Nikolaos; Petousis, Markos; Saltas, Vassilis; Papadakis, Vassilis; Spiridaki, Mariza; Mountakis, Nikolaos; Argyros, Apostolos; Valsamos, John; Nasikas, Nektarios K; Vidakis, Nectarios
3D/类器官
发表日期：2024
文献求助 收藏