日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Explainable Deep Learning Framework for Binary Corrosion Image Classification Using Grad-CAM

基于Grad-CAM的二元腐蚀图像分类可解释深度学习框架

期刊:Sensors
影响因子:3.5
doi:10.3390/s25227070
Aminudin, Muhammad Amir Imran; Abdullah, Mohd Na'im; Mustapha, Faizal; Eng, Kee Kok; Mustapha, Mazli; Mustapha, Aliyu
发表日期：2025
文献求助 收藏

Sustainable Aluminosilicate Coatings from Palm Oil Waste for Enhanced Thermal and Microstructure Properties

利用棕榈油废料制备可持续铝硅酸盐涂层，以增强其热性能和微观结构性能

期刊:Materials
影响因子:3.2
doi:10.3390/ma18040821
Shamsudin, Mohd Afdhal; Mustapha, Faizal; Abdullah, Mohd Na'im; Mustapha, Mazli
发表日期：2025
文献求助 收藏

Defect Detection of GFRP Composites through Long Pulse Thermography Using an Uncooled Microbolometer Infrared Camera

利用非制冷微测辐射热计红外相机进行长脉冲热成像技术检测玻璃纤维增强复合材料缺陷

期刊:Sensors
影响因子:3.5
doi:10.3390/s24165225
Anwar, Murniwati; Mustapha, Faizal; Abdullah, Mohd Na'im; Mustapha, Mazli; Sallih, Nabihah; Ahmad, Azlan; Mat Daud, Siti Zubaidah
发表日期：2024
文献求助 收藏

Thermal Properties and Drying Shrinkage Performance of Palm Kernel Shell Ash and Rice Husk Ash-Based Geopolymer Concrete

棕榈仁壳灰和稻壳灰基地聚合物混凝土的热性能和干燥收缩性能

期刊:Materials
影响因子:3.2
doi:10.3390/ma17061298
Abdullah, Mohd Na'im; Mustapha, Faizal; Yusof, Nurul 'Izzati; Khan, Tabrej; Sebaey, Tamer A
发表日期：2024
文献求助 收藏

A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization.

天然纤维基3D打印长丝综述：长丝制造和表征

期刊:Materials
影响因子:3.2
doi:10.3390/ma16114052
Ahmad Mohd Nazri, Ishak Mohamad Ridzwan, Mohammad Taha Mastura, Mustapha Faizal, Leman Zulkiflle
其它
发表日期：2023
文献求助 收藏

Effect of Different Pre-Treatment on the Microstructure and Intumescent Properties of Rice Husk Ash-Based Geopolymer Hybrid Coating

不同预处理对稻壳灰基地聚合物混合涂层微观结构和膨胀性能的影响

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14112252
Abdullah, Mohd Na'im; Mustapha, Faizal; Ahmad, Kamarul Arifin; Mustapha, Mazli; Khan, Tabrej; Singh, Balbir; Sebaey, Tamer A
发表日期：2022
文献求助 收藏

Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer

镓中间层扩散焊接A5083铝合金和A36低碳钢的力学性能和腐蚀行为

期刊:Materials
影响因子:3.2
doi:10.3390/ma15186331
Ismail, Asmawi; Othman, Nurul Husna; Mustapha, Mazli; Mohamed Saheed, Mohamed Shuaib; Abdullah, Zaki; Muhammed, Musa; Mohamed Saat, Asmalina; Mustapha, Faizal
发表日期：2022
文献求助 收藏

The Effect of Residual Solvent in Carbon-Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour

残留溶剂对碳基填料增强聚合物涂层固化性能、力学性能和腐蚀性能的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma15103445
Othman, Nurul Husna; Mustapha, Mazli; Sallih, Nabihah; Ahmad, Azlan; Mustapha, Faizal; Ismail, Mokhtar Che
发表日期：2022
文献求助 收藏

Rice-Husk-Ash-Based Geopolymer Coating: Fire-Retardant, Optimize Composition, Microstructural, Thermal and Element Characteristics Analysis

稻壳灰基地质聚合物涂层：阻燃性、优化成分、微观结构、热学和元素特性分析

期刊:Polymers
影响因子:4.9
doi:10.3390/polym13213747
Mohd Basri, Mohd Salahuddin; Mustapha, Faizal; Mazlan, Norkhairunnisa; Ishak, Mohd Ridzwan
发表日期：2021
文献求助 收藏

Rice Husk Ash-Based Geopolymer Binder: Compressive Strength, Optimize Composition, FTIR Spectroscopy, Microstructural, and Potential as Fire-Retardant Material

稻壳灰基地聚合物粘合剂：抗压强度、优化组成、傅里叶变换红外光谱、微观结构及作为阻燃材料的潜力

期刊:Polymers
影响因子:4.9
doi:10.3390/polym13244373
Mohd Basri, Mohd Salahuddin; Mustapha, Faizal; Mazlan, Norkhairunnisa; Ishak, Mohd Ridzwan
发表日期：2021
文献求助 收藏