日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Effects of Alloy Composition, Hardness, and Milling Parameters on the Cutting Forces of Al-Li-Based Alloys

合金成分、硬度和铣削参数对铝锂基合金切削力的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma18122683
Radan, Lida; Songmene, Victor; Samuel, Agnes M; Samuel, Fawzy H
发表日期：2025
文献求助 收藏

Experimental Investigation on the Effects of Tool Geometry and Cutting Conditions on Machining Behavior during Edge Finishing of Granite Using Concave and Chamfered Profiling Tools

利用凹面和倒角轮廓刀具对花岗岩边缘精加工过程中刀具几何形状和切削条件的影响的实验研究

期刊:Micromachines
影响因子:3
doi:10.3390/mi15030315
Mateur, Wael; Songmene, Victor; Kouam, Jules
发表日期：2024
文献求助 收藏

A Review on the Analysis of Thermal and Thermodynamic Aspects of Grain Refinement of Aluminum-Silicon-Based Alloys

铝硅基合金晶粒细化热力学和热力学分析综述

期刊:Materials
影响因子:3.2
doi:10.3390/ma16165639
Samuel, Ehab; Samuel, Agnes M; Songmene, Victor; Samuel, Fawzy H
发表日期：2023
文献求助 收藏

Investigating the Effect of Heat Treatment on the Microstructure and Hardness of Aluminum-Lithium Alloys

研究热处理对铝锂合金显微组织和硬度的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma16196502
Radan, Lida; Songmene, Victor; Zedan, Yasser; Samuel, Fawzy H
发表日期：2023
文献求助 收藏

Characterization of Si and SiO(2) in Dust Emitted during Granite Polishing as a Function of Cutting Conditions

花岗岩抛光过程中产生的粉尘中Si和SiO(2)的表征及其与切削条件的关系

期刊:Materials
影响因子:3.2
doi:10.3390/ma15113965
Kouam, Jules; Songmene, Victor; Bahloul, Ali; Samuel, Agnes M
发表日期：2022
文献求助 收藏

Milling Al520-MMC Reinforced with SiC Particles and Additive Elements Bi and Sn

采用碳化硅颗粒和添加元素铋和锡增强的Al520-MMC进行铣削加工

期刊:Materials
影响因子:3.2
doi:10.3390/ma15041533
Alipour Sougavabar, Mahmoud; Niknam, Seyed Ali; Davoodi, Behnam; Songmene, Victor
多发性骨髓瘤
发表日期：2022
文献求助 收藏

Mechanical Performance and Precipitation Behavior in Al-Si-Cu-Mg Cast Alloys: Effect of Prolonged Thermal Exposure

Al-Si-Cu-Mg铸造合金的力学性能和析出行为：长期热暴露的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma15082830
Abdelaziz, Mohamed H; Samuel, Agnes M; Doty, Herbert W; Songmene, Victor; Samuel, Fawzy H
发表日期：2022
文献求助 收藏

Experimental Investigation on Part Quality and Dust Emission during Minimum Quantity Lubricated (MQL) Edge Finishing of Granite

花岗岩微量润滑（MQL）边缘精加工过程中零件质量和粉尘排放的实验研究

期刊:Micromachines
影响因子:3
doi:10.3390/mi13101714
Bahri, Haithem; Songmene, Victor; Kouam, Jules
发表日期：2022
文献求助 收藏

Low and High Speed Orthogonal Cutting of AA6061-T6 under Dry and Flood-Coolant Modes: Tool Wear and Residual Stress Measurements and Predictions

AA6061-T6铝合金在干式和冷却液浸没模式下的低速和高速正交切削：刀具磨损和残余应力测量与预测

期刊:Materials
影响因子:3.2
doi:10.3390/ma14154293
Javidikia, Mahshad; Sadeghifar, Morteza; Songmene, Victor; Jahazi, Mohammad
发表日期：2021
文献求助 收藏

CNC Edge Finishing of Granite: Effect of Machining Conditions on Part Quality, Cutting Forces, and Particle Emissions

花岗岩数控边缘精加工：加工条件对零件质量、切削力和颗粒物排放的影响

期刊:Materials
影响因子:3.2
doi:10.3390/ma14216496
Bahri, Haithem; Songmene, Victor; Kouam, Jules; Samuel, Agnes Marie; Samuel, Fawzy Hosny
发表日期：2021
文献求助 收藏