日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:

Investigation of the Sensitivity of Acoustic Emission to the Differentiation Between Mode I, II, and III Fracture in Bulk Polymer Materials

研究声发射对块状聚合物材料I型、II型和III型断裂模式区分的敏感性

Shivaie Kojouri, Ali; Aggelis, Dimitrios G; Karami, Javane; Sharma, Akash; Van Paepegem, Wim; Van Hemelrijck, Danny; Kalteremidou, Kalliopi-Artemi

The Accuracy of an Optical White Light Desktop 3D Scanner and Cone Beam CT Scanner Compared to a Multi-Slice CT Scanner to Digitize Anatomical 3D Models: A Pilot Study

光学白光台式3D扫描仪和锥束CT扫描仪与多层螺旋CT扫描仪在数字化解剖3D模型方面的精度比较:一项初步研究

Lievens, Mauranne; De Kock, Lisa; Ureel, Matthias; Villeirs, Geert; Van Paepegem, Wim; Coopman, Renaat

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups.

不同铺层热塑性纳米纤维增韧碳/环氧复合材料的低速冲击强度和冲击后压缩强度

Meireman Timo, Verboven Erik, Kersemans Mathias, Van Paepegem Wim, De Clerck Karen, Daelemans Lode

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

通过熔融沉积成型技术制备高纤维含量连续纤维增强芳纶/PETG 3D打印复合材料

Rijckaert, Sander; Daelemans, Lode; Cardon, Ludwig; Boone, Matthieu; Van Paepegem, Wim; De Clerck, Karen

Numerical Study on the Effect of Matrix Self-Heating on the Thermo-Visco-Plastic Response of Continuous Fiber-Reinforced Polymers under Transverse Tensile Loading

基体自加热对连续纤维增强聚合物在横向拉伸载荷下热粘塑性响应影响的数值研究

Sevenois, Ruben D B; Hao, Pei; Van Paepegem, Wim; Gilabert, Francisco A

Correction: Sinchuk et al. Variational and Deep Learning Segmentation of Very-Low-Contrast X-ray Computed Tomography Images of Carbon/Epoxy Woven Composites. Materials 2020, 13, 936

更正:Sinchuk 等人,《碳/环氧树脂编织复合材料极低对比度 X 射线计算机断层扫描图像的变分和深度学习分割》,Materials 2020, 13, 936

Sinchuk, Yuriy; Kibleur, Pierre; Aelterman, Jan; Boone, Matthieu N; Van Paepegem, Wim

Permanent Deformation and Stiffness Degradation of Open Hole Glass/PA6 UD Thermoplastic Composite in Tension and Compression

开孔玻璃/PA6单向热塑性复合材料在拉伸和压缩下的永久变形和刚度退化

Sevenois, Ruben Dirk; Yang, Xiaoyu; Verboven, Erik; Kersemans, Mathias; Van Paepegem, Wim

A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development

基于纤维断裂和团簇发展的纵向拉伸失效模型验证的同步辐射计算机断层扫描数据集

Breite, C; Melnikov, A; Turon, A; de Morais, A B; Bourlot, C Le; Maire, E; Schöberl, E; Otero, F; Mesquita, F; Sinclair, I; Costa, J; Mayugo, J A; Guerrero, J M; Gorbatikh, L; McCartney, L N; Hajikazemi, M; Mehdikhani, M; Mavrogordato, M N; Camanho, P P; Tavares, R; Spearing, S M; Lomov, S V; Pimenta, S; Van Paepegem, W; Swolfs, Y

A novel experimental setup for evaluating the stiffness of ankle foot orthoses

一种用于评估踝足矫形器刚度的新型实验装置

Ielapi, A; Vasiliauskaite, E; Hendrickx, M; Forward, M; Lammens, N; Van Paepegem, W; Deckers, J P; Vermandel, M; De Beule, M

Bragg-Grating-Based Photonic Strain and Temperature Sensor Foils Realized Using Imprinting and Operating at Very Near Infrared Wavelengths

利用压印技术实现的基于布拉格光栅的光子应变和温度传感器箔,可在近红外波长下工作

Jeroen Missinne, Nuria Teigell Benéitez, Marie-Aline Mattelin, Alfredo Lamberti, Geert Luyckx, Wim Van Paepegem, Geert Van Steenberge