日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Investigation of the Sensitivity of Acoustic Emission to the Differentiation Between Mode I, II, and III Fracture in Bulk Polymer Materials

研究声发射对块状聚合物材料I型、II型和III型断裂模式区分的敏感性

期刊:Polymers
影响因子:4.9
doi:10.3390/polym17010125
Shivaie Kojouri, Ali; Aggelis, Dimitrios G; Karami, Javane; Sharma, Akash; Van Paepegem, Wim; Van Hemelrijck, Danny; Kalteremidou, Kalliopi-Artemi
发表日期：2025
文献求助 收藏

The Accuracy of an Optical White Light Desktop 3D Scanner and Cone Beam CT Scanner Compared to a Multi-Slice CT Scanner to Digitize Anatomical 3D Models: A Pilot Study

光学白光台式3D扫描仪和锥束CT扫描仪与多层螺旋CT扫描仪在数字化解剖3D模型方面的精度比较：一项初步研究

期刊:Craniomaxillofacial Trauma & Reconstruction
影响因子:0.4
doi:10.3390/cmtr18020027
Lievens, Mauranne; De Kock, Lisa; Ureel, Matthias; Villeirs, Geert; Van Paepegem, Wim; Coopman, Renaat
3D/类器官
发表日期：2025
文献求助 收藏

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups.

不同铺层热塑性纳米纤维增韧碳/环氧复合材料的低速冲击强度和冲击后压缩强度

期刊:Polymers
影响因子:4.9
doi:10.3390/polym16213060
Meireman Timo, Verboven Erik, Kersemans Mathias, Van Paepegem Wim, De Clerck Karen, Daelemans Lode
其它
发表日期：2024
文献求助 收藏

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

通过熔融沉积成型技术制备高纤维含量连续纤维增强芳纶/PETG 3D打印复合材料

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14020298
Rijckaert, Sander; Daelemans, Lode; Cardon, Ludwig; Boone, Matthieu; Van Paepegem, Wim; De Clerck, Karen
3D/类器官
发表日期：2022
文献求助 收藏

Numerical Study on the Effect of Matrix Self-Heating on the Thermo-Visco-Plastic Response of Continuous Fiber-Reinforced Polymers under Transverse Tensile Loading

基体自加热对连续纤维增强聚合物在横向拉伸载荷下热粘塑性响应影响的数值研究

期刊:Polymers
影响因子:4.9
doi:10.3390/polym14101941
Sevenois, Ruben D B; Hao, Pei; Van Paepegem, Wim; Gilabert, Francisco A
发表日期：2022
文献求助 收藏

Correction: Sinchuk et al. Variational and Deep Learning Segmentation of Very-Low-Contrast X-ray Computed Tomography Images of Carbon/Epoxy Woven Composites. Materials 2020, 13, 936

更正：Sinchuk 等人，《碳/环氧树脂编织复合材料极低对比度 X 射线计算机断层扫描图像的变分和深度学习分割》，Materials 2020, 13, 936

期刊:Materials
影响因子:3.2
doi:10.3390/ma15228168
Sinchuk, Yuriy; Kibleur, Pierre; Aelterman, Jan; Boone, Matthieu N; Van Paepegem, Wim
发表日期：2022
文献求助 收藏

Permanent Deformation and Stiffness Degradation of Open Hole Glass/PA6 UD Thermoplastic Composite in Tension and Compression

开孔玻璃/PA6单向热塑性复合材料在拉伸和压缩下的永久变形和刚度退化

期刊:Materials
影响因子:3.2
doi:10.3390/ma14102646
Sevenois, Ruben Dirk; Yang, Xiaoyu; Verboven, Erik; Kersemans, Mathias; Van Paepegem, Wim
发表日期：2021
文献求助 收藏

Detection, Localization and Quantification of Impact Events on a Stiffened Composite Panel with Embedded Fiber Bragg Grating Sensor Networks

利用嵌入式光纤布拉格光栅传感器网络对加筋复合材料面板上的冲击事件进行检测、定位和量化

期刊:Sensors
影响因子:3.5
doi:10.3390/s17040743
Lamberti, Alfredo; Luyckx, Geert; Van Paepegem, Wim; Rezayat, Ali; Vanlanduit, Steve
发表日期：2017
文献求助 收藏

Fatigue of Ti6Al4V Structural Health Monitoring Systems Produced by Selective Laser Melting

采用选择性激光熔化技术制造的Ti6Al4V结构健康监测系统的疲劳性能

期刊:Materials
影响因子:3.2
doi:10.3390/ma9020106
Strantza, Maria; Vafadari, Reza; de Baere, Dieter; Vrancken, Bey; van Paepegem, Wim; Vandendael, Isabelle; Terryn, Herman; Guillaume, Patrick; van Hemelrijck, Danny
发表日期：2016
文献求助 收藏

A micro-computed tomography technique to study the quality of fibre optics embedded in composite materials

一种用于研究复合材料中光纤质量的微型计算机断层扫描技术

期刊:Sensors
影响因子:3.5
doi:10.3390/s150510852
Chiesura, Gabriele; Luyckx, Geert; Voet, Eli; Lammens, Nicolas; Van Paepegem, Wim; Degrieck, Joris; Dierick, Manuel; Van Hoorebeke, Luc; Vanderniepen, Pieter; Sulejmani, Sanne; Sonnenfeld, Camille; Geernaert, Thomas; Berghmans, Francis
发表日期：2015
文献求助 收藏