Plasma-enhanced atomic layer deposition (PEALD) is utilized to improve the barrier properties of an organic chip-film patch (CFP) when it is used as an implant to prevent moisture and ions from migrating into the embedded electronic circuits. For this purpose, surface condition and material properties of eight modifications of Al(2)O(3)-TiO(2) nanolaminates sequentially deposited on polyimide PI-2611 films are evaluated in detail. The effect of stress-induced warpage of the deposited Al(2)O(3)-TiO(2) on the wafer level is calculated with the Stoney equation and reveals higher tensile stress values while increasing the thickness of Al(2)O(3)-TiO(2) nanolaminates from 20 up to 80 nm. Contact angle measurement and atomic force microscopy are used to investigate the surface energy and wettability, as well as the surface morphology of polyimide-Al(2)O(3)-TiO(2) interfaces. We show that plasma treatment of pristine polyimide leads to an enhanced adhesion force of the PEAL-deposited layer by a factor of 1.3. The water vapor transmission rate (WVTR) is determined by exposing the coated polyimide films to 85% humidity and 23 °C and yields down to 1.58 à 10(-3) g(H(2)O)/(m(2) d). The data obtained are compared with alternative coating processes using the polymers parylene-C and benzocyclobutene (BCB). The latter shows higher WVTR values of 1.2 à 10(-1) and 1.7 à 10(-1) g(H(2)O)/(m(2) d) compared to the PEALD-PI-2611 systems, indicating lower barrier properties. Two Al(2)O(3)-TiO(2) modifications with low WVTR values have been chosen for encapsulating the CFP substrates and exposing them in a long-time experiment to chemical and mechanical loads in a chamber filled with phosphate-buffered saline at 37 °C, pH 7.3, and a cyclically applied pressure of 160 mbar (â¼120 mm Hg). The electrical leakage behavior of the CFP systems is measured and reveals reliable electrical long-term stability far beyond 11 months, highlighting the great potential of PEALD-encapsulated CFPs.
Flexible Ultrathin Chip-Film Patch for Electronic Component Integration and Encapsulation using Atomic Layer-Deposited Al(2)O(3)-TiO(2) Nanolaminates.
采用原子层沉积 Al(2)O(3)-TiO(2) 纳米层压材料,用于电子元件集成和封装的柔性超薄芯片薄膜贴片
阅读:8
作者:Passlack Ulrike, Simon Nicolai, Bucher Volker, Harendt Christine, Stieglitz Thomas, Burghartz Joachim N
| 期刊: | ACS Applied Materials & Interfaces | 影响因子: | 8.200 |
| 时间: | 2023 | 起止号: | 2023 Mar 29; 15(12):16221-16231 |
| doi: | 10.1021/acsami.2c22513 | ||
特别声明
1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。
2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。
3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。
4、投稿及合作请联系:info@biocloudy.com。
