Abstract
Polyvinylidene fluoride (PVDF) films possess multifunctional ability for piezo/pyro/ferroelectronic applications. One critical challenge of the traditional techniques is the complicated fabrication process for obtaining the poled films. In this work, the PVDF film is facilely prepared by the solution cast on hydrophilically treated substrates. The obtained PVDF films exhibit fairly good pyroelectricity comparable to those fabricated by thermal poling, indicating the film is self-polarized. This result is attributed to the hydrogen-bonding-induced orderly arrangement of the first sub-nanolayer at the bottom, which serves as a "seed layer" and triggered alignment of the rest of the film in a layer-by-layer approach. Additionally, to suppress the piezoelectric noise, a pyroelectric sensor with a novel bilayer structure is developed using the as-prepared PVDF film. Compared with the conventional monolayer sensor, the signal-to-noise ratio of the bilayer one is drastically improved to 38 dB from 18 dB. The above results provide great possibilities for achieving a high-performance wearable pyroelectric sensor with reduced cost and simple procedures.