Abstract
Recently, considerable attention has been drawn to the field of micro/nanofluidic channels. However, current methods for fabricating micro/nanochannels are complex, costly, and time-intensive. In the present work, we successfully fabricated transparent submicron-channels on fused silica substrates (SiO(2)) using a straightforward laser process. To achieve this, a single-pulse excimer laser irradiation in a rear side configuration was employed to treat a thin film of UV-absorbing silicon suboxide (SiO(x)) through the transparent SiO(2) substrate. A polydimethylsiloxane (PDMS) superstrate (coating layer) was applied over the SiO(x) film before laser exposure, serving as a confinement for controlled structure formation induced by the laser. Under optimal laser fluence, the thin SiO(x) film buckled, leading to the formation of channels with a width ranging from 10 to 20 µm and a height of 800 to 1200 nm, exhibiting a bell-like cross-sections following the so-called Euler buckling mode. Wider channels displayed morphologies resembling varicose or telephone cord modes. Subsequent high-temperature annealing led to the oxidation of SiO(x), resulting transparent SiO(2) channels on the fused silica substrate. The manufactured nanochannels exhibited promising potential for effectively transporting fluids of diverse viscosities. Various fluids were conveyed through these nanochannels via capillary action and in accordance with the Lucas-Washburn equation.