Photoacoustic methane detection inside a MEMS microphone

在MEMS麦克风内部进行光声甲烷检测

阅读:1

Abstract

An innovative laser based photoacoustic (PA) gas sensing concept with intrinsic miniaturization potential was developed and investigated for methane trace gas detection. An interband cascade laser (ICL) with an optical power of 8.5 mW targets a methane (CH(4)) absorption line feature around 3057.7 cm(-1) (or 3270 nm). The ICL was focused into the sound port of a MEMS microphone, where the PA signal was generated and detected using a wavelength modulation concept (2f-WMS-PAS). The MEMS microphone was successfully implemented as an intrinsically miniaturized PA cell being gas sensing volume, acoustic resonator and sound transducer at once. Frequencies between 2 kHz and 100 kHz were investigated and used for methane detection. A sensitive and resonant methane detection at 41.8 kHz was investigated by concentration variations between 0 and 10 ppm CH(4) in N(2). A limit of detection ( 3σ -LOD) of 329 ppb was estimated. The long term stability of this sensor was investigated by the measurement of methane in ambient air. A noise equivalent concentration (NEC) of 14 ppb (parts per billion) at an average time of 10 s was estimated. This value corresponds to a normalized noise equivalent absorption (NNEA) of 2⋅10-8 W cm(-1) Hz(-1/2). Using the MEMS microphone directly as PA cell offers the possibility for an extremely miniaturized, highly sensitive and very cost-efficient photoacoustic trace gas sensor.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。