Abstract
To address the issue of extra-large structural deformation or strain in infrastructures such as bridges, buildings, railroads, and pipelines during catastrophic events, this study proposes a wide-range fiber Bragg grating (FBG) strain sensor utilizing a snake spring desensitization mechanism to share large parts of the strains. Initially, the axial stiffness of the snake spring desensitization mechanism was derived using the strain energy method, which was applied for stiffness calculation, range determination, and parameter design of the entire structure, where the snake spring and the FBG strain sensor were connected in series. Then, the snake springs were fabricated using 3D printing technology and assembled with the FBG sensor to construct a wide-range strain sensor. The wide-range sensor was subsequently calibrated, achieving a strain range of 10,000 με and a linearity coefficient above 0.9995. Finally, the sensor was installed in a pipeline for testing, yielding favorable results. These results demonstrate that the proposed sensor exhibits a wide strain monitoring range and can be effectively used for real-time structural safety analysis by continuously monitoring localized large structure strains.