Abstract
Dairy products can be contaminated by parabens and phenolic compounds from a vast variety of sources, such as packaging and manufacturing processes, or livestock through feed and environmental water. A two-step continuous solid-phase extraction (SPE) and purification methodology was developed here for the determination of both types of compounds. In the first step, a sample extract is passed in sequence through an EMR-lipid sorbent and an Oasis PRiME HBL sorbent to remove fat and preconcentrate the analytes for subsequent detection and quantification by UHPLC-MS/MS. This method enabled the determination of 28 parabens and phenolic contaminant with excellent recovery (91-105%) thanks to the SPE sorbent combination used. The proposed method was validated through the determination of the target compounds, and was found to provide low detection limits (1-20 ng/kg) with only slight matrix effects (0-10%). It was used to analyse 32 different samples of dairy products with different packaging materials. Bisphenol A and bisphenol Z were the two phenolic compounds quantified in the largest number of samples, at concentrations over the range of 24-580 ng/kg, which did not exceed the limit set by European regulations. On the other hand, ethylparaben was the paraben found at the highest levels (33-470 ng/kg).