Abstract
The preparation of complex porous materials using a small molecular surfactant as the stabilizer of a high internal phase emulsion can result in harm to the environment. In this study, porous composites based on soy protein isolate with poly(acrylic acid) were prepared by in situ polymerization of a high internal phase monomer emulsion with an internal phase volume fraction of 80%. The material was prepared from acrylic acid and an N,N-methyl diacrylic acid monomer solution as the continuous phase, peanut oil as the dispersed phase, and soy protein isolate as the composite stabilizer. Scanning electron microscopy showed that porous composites exhibited a concave/convex three-dimensional interpenetrating pore structure. Fourier-transform infrared spectra revealed the existence of many active groups such as carboxyl, amino, hydroxyl, and sulfhydryl. The composite had a high adsorption capacity for lead ions, even at low concentration, with a removal rate of up to 95.7%. The adsorption process conformed to a two-stage model involving internal diffusion and Langmuir isothermal adsorption. The maximum saturated adsorption capacity was 36.71 mg/g when the initial solution concentration was 150 mg/L, the adsorbent concentration was 7.0 g/L, and the adsorption mechanism involved chemical interactions between the lead ions and the composite groups -COOH, -OH, and -SH.