Abstract
In the coal exploration of China, the commonly used direct method within 120 min has potential errors in lost gas calculation of deep coal seam for its complex geological conditions. The exploration of deep coal resources by drilling holes in Huainan of Eastern China offered an opportunity to starting research into developing a new method. A developed method with error analysis was constructed to estimate the lost gas using the total desorption process obtained from exploratory coal cores. The accuracy of the direct method was also evaluated comparatively. The result shows that the desorption curve of tested coal samples matches the fitted curve equation. Desorption temperature and the tectonic coal with associated pore characteristics significantly affect the variation of the adsorption characteristics and the estimation of lost gas. The direct method obviously underestimates the lost gas, and methodology using a new lost gas estimation procedure with additional residual gas allows for achieving relatively accurate results of the determination of gas content in coal seams. The calculated result of the new method is about 1.00-1.41 times that of the direct method. The error analysis of desorption results allowed us to determine the dependence between the time (retrieval time and desorption time) and determination method. The time used for desorption in the tank is allowed to extend to less than 400 min or more than 1000 min, which is very potentially important to accurately get the coalbed gas content for coring samples, especially deep exploratory cores for field application.