Abstract
The artificial joint is one of the most effective methods to treat joint injuries. The service performance of artificial joints is gradually weakened because of the wear of artificial joints in actual service. In order to obtain the potential failure mechanism of the artificial joint in actual service, the study was carried out with the multiple factors that affect the service performance of the artificial joint. The experimental study was carried out on the change rule of mechanical behavior of the contact interface between the artificial joint of titanium alloy and cortical bone. The multi-factor is compression load, contact load, friction velocity, and lubrication environment, respectively. The results indicate that the friction coefficient, wear mass, and wear coefficient of Ti-6A1-4V titanium alloy decreased with the increasing of the compression load. The friction rate and the friction coefficient of Ti-6A1-4V titanium alloy decreased with the increasing of the contact load. The wear mass and friction coefficient of Ti-6A1-4V titanium alloy increased with the increasing of contact load. The lubrication effect is better with the increasing of lubricant concentration. Based on the observation of the SEM, the wear type influenced by compression load and friction rate is mainly abrasive wear and oxidation wear. The wear type influenced by contact load is mainly abrasive wear and adhesive wear. The wear type influenced by lubricants is mainly oxidation wear. When wear mass and wear coefficient are used as the criteria for evaluating friction and wear, the order of influential factors to friction and wear of Ti-6Al-4V titanium alloy plate is friction rate, compression load, contact load, and lubricant concentration. This research can provide a theoretical reference for the optimal manufacture of the artificial joint of titanium alloy and optimal rules of safe service conditions.