Abstract
More than 40 years ago, the expansion joints on the Basel border bridge were constructed using corbels and dapped ends. The consoles had to be reinforced as part of the renovation measures due to damage caused by chloride entry and due to the increased loads. Diagonal rods, which were prestressed, were used. Fiber-optic sensors were additionally installed to these highly stressed rods in order to measure the strains and temperatures. This now makes it possible to measure the actual strains in the strengthening of the corbel, estimate fatigue loads, and set up a warning system in case of overstressing. This article presents the design of the measurement system and the analysis of the data. Furthermore, the reference measurements that can establish the relationship between the measured strains and the loads passed over are presented.