Abstract
Catheter-associated urinary tract infection (CAUTI) induced by rapid bacterial colonization and biofilm formation on urinary catheters is a key issue that urgently needs to be addressed. To prevent CAUTI, many contact-killing, non-leaching coatings have been developed for the surfaces of silicone catheters. However, due to the chemical inertness of the silicone substrate, most current coatings lack adhesion and are unstable under external forces. Thus, the aim of this study was to develop a surface coating that has both good antibacterial ability and a high affinity toward silicone substrates. To achieve high affinity, a pre-coating layer with abundant surface vinyl groups, named SI-vinyl, was prepared on the silicone substrate by moisture curing using a mixture of α,ω-dihydroxy polydimethylsiloxane and vinyltrimethoxysilane as the painting agent. To endow the surface with contact-killing ability, a series of polyurethanes with different contents of quaternary ammonium salt groups in their main chain and two vinyl end groups were synthesized and covalently grafted onto the surface of SI-vinyl, resulting in corresponding bactericidal coatings with different surface contents of quaternary ammonium salt groups (SI-QAS). Of these bactericidal coatings, SI-QAS-2, with a surface QAS content of 2.1 × 10(16) N(+) cm(-2), was selected as the best coating based on the consideration of stability, compatibility, and antibacterial ability. The SI-QAS-2 coating demonstrated high contact-killing performance, rapidly inactivating 72.8%, 99.9%, and 98.9% of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa within 30 min. Furthermore, even after being exposed to a high concentration of bacteria (10(6) CFU/mL) for 4 days, the SI-QAS-2 coating still maintained a high bactericidal ratio of over 80%. In summary, we developed a novel contact-killing coating that reduces the risk of bacterial infections caused by catheter implantation, demonstrating that it has high affinity toward silicone substrates, excellent contact-killing efficiency, a facile preparation method, and potential for further application.