Abstract
The morphologies of the microphase-separated structures in the binary blends of diblock copolymers (AB/AB) have been studied intensively for the case of diblock copolymers bearing antisymmetric compositions with similar molecular weights. Here, the two diblock copolymers 1 and 2, of which compositions are 0.5 - x and 0.5 + x (0 < x < 0.5), respectively, were blended, and the morphology diagram was constructed in the plot of χZ vs the average composition of the A component, where χ is the interaction parameter between A and B segments and Z is the average degree of polymerization of the two AB diblock copolymers. The temperature-dependent morphologies were analyzed by synchrotron small-angle X-ray scattering (SAXS) measurements. It was found that the morphology diagram agrees in principle with the theoretical one for the neat AB diblocks by Matsen and Bates (Macromolecules 1996, 29, 1091-1098), although the disordered phase was a bit expanded in the experimentally determined morphology diagram. Anomalous temperature dependencies in the lamellar spacing have been also comprehensively studied for the binary blends of antisymmetric diblock copolymers as a function of the degree of compositional asymmetry by closely adjusting the average composition in the blend specimen at 0.50. For this purpose, more than 20 neat diblock copolymers have been synthesized with a wide range of compositions from 0.20 to 0.87 and a range of molecular weight of 12 000-33 800. The temperature dependencies of the lamellar spacing were also analyzed by synchrotron SAXS measurements. As a result, the following things were found. The scaling exponent α in D ∼ T (α) was still negative but slightly larger than the usual value (i.e., α = -0.33) for the smaller degree of asymmetry in the composition (i.e., x is small), while α became positive for the higher degree of asymmetry. The latter result is very anomalous because the temperature dependence is opposite (i.e., the lamellar spacing increases with an increase of temperature). The value of α was found to be linearly rationalized with the degree of asymmetry τ (which is especially introduced in the current paper for this purpose), for the binary blends with the average composition of 0.50. Based on this result, one can prepare lamellar microdomains, of which spacing does not change with temperature, by blending two diblock copolymers with τ = 1.33 (corresponding to 0.3 and 0.7 of compositions) having similar molecular weights. This would be important for manufacturing materials with properties (for instance, the optical property) independent of temperature. From the current study, the binary blends of the antisymmetric diblock copolymers are concluded to be versatile such that the precise controls of the morphologies and the temperature dependencies of the lamellar microdomains are plausible.