Abstract
The development of deep geotechnical engineering is restricted by the complex geological conditions of deep rock masses and the unknown creep mechanism of rock in water-rich environments. To study the shear creep deformation law of the anchoring rock mass under different water content conditions, marble was used as the bedrock to make anchoring specimens, and shear creep tests of the anchoring rock mass under different water contents were carried out. The influence of water content on rock rheological characteristics is explored by analysing the related mechanical properties of the anchorage rock mass. The coupling model of the anchorage rock mass can be obtained by connecting the nonlinear rheological element and the coupling model of the anchorage rock mass in series. Related studies show that (1) shear creep curves of anchorage rock masses under different water contents have typical creep characteristics, including decay, stability and acceleration stages. The creep deformation of the specimens can be improved with increasing moisture content. (2) The long-term strength of the anchorage rock mass shows an opposite change law with increasing water content. The creep rate of the curve increases gradually with increasing water content. The creep rate curve shows a U-shaped change under high stress. (3) The nonlinear rheological element can explain the creep deformation law of rock in the acceleration stage. By connecting the nonlinear rheological element with the coupled model of anchoring rock mass in series, the coupled model of water‒rock under water cut conditions can be obtained. The model can be used to study and analyse the whole process of shear creep of an anchored rock mass under different water contents. This study can provide theoretical support for the stability analysis of anchor support tunnel engineering under water cut conditions.