Highly sensitive field-effect transistor sensor based on ZnO/TiO(2) for quantification of aflatoxin G2 with optimized initial measurement

基于ZnO/TiO₂的高灵敏度场效应晶体管传感器用于定量检测黄曲霉毒素G2,并优化了初始测量。

阅读:1

Abstract

Aflatoxin G2 (AFG(2)) is a secondary metabolite produced by certain molds that contaminate agricultural products, including grains, nuts, and spices. If humans consume contaminated products, severe liver damage and cancer can occur, so measuring its concentration is necessary to ensure food safety. In this study, a highly sensitive ion-sensitive field-effect transistor (ISFET) sensor based on a ZnO/TiO(2) gate structure was developed for the detection of AFG(2). The fabrication steps included the oxidation of p-type silicon, followed by the simultaneous synthesis and sequential deposition of ZnO and TiO(2) using a hydrothermal method. Characterization by FESEM and XRD confirmed the structure of ZnO nanorods and TiO(2) nanoparticles. Electrical measurements then determined the correct operation of the ISFET and the optimum sensing voltage. The sensor exhibited a clear and robust response to increasing AFG(2) concentration in 0.01 M phosphate-buffered saline, with a low detection limit and sensitivity of 4.610 nM and 2.068 µA/nM, respectively (SD 2.89 µA). The sensor was able to detect AFG(2) at pH levels ranging from 3 to 10; however, the optimum pH range was found to be 7-8, and it also exhibited good reusability and stability. The pseudo-first kinetic mechanism was consistent with the assay results and detected concentrations much lower than the thresholds set by the FDA in corn juice. The quantitative detection of AFG(2) by the proposed sensor is confirmed by its acceptable performance, high sensitivity, real-time operation, and well-defined kinetic response. Thus, it is proposed as a new method and a good complement to traditional methods in AFG(2) detection.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。