Abstract
Although flooding technology has found wide application in low-permeability reservoir development practices, the oil recovery enhancement mechanisms for different injection fluids still lack specific focus based on comprehensive investigations. Therefore, in this paper, supercritical CO(2) (ScCO(2)), N(2), and water injection processes in oil-saturated low-permeability tight cores were comparatively studied. To reveal the effect of physicochemical properties of the injection fluid on the oil recovery efficiency, the Berea sandstones with three permeability levels and kerosene were employed in this study to exclude other parameter influences. The flooding processes employing various injection media were investigated based on quantitative comparisons of the oil recovery factor and the displacement pressure difference at two system pressures. The experimental results show recovery efficiencies of 59-91 and 84-92% with the increasing permeability for the ScCO(2) injection process at system pressures of 15 and 25 MPa, respectively, which are much higher than 26-40 and 21-52% in the N(2) case and 43-46 and 45-49% in the water cases. Interfacial tension (IFT) measurement results indicate that miscibility conditions have been achieved for the ScCO(2)/oil system, thus leading to much higher oil recovery. On the other hand, the pressure difference results show a similar magnitude of 10 MPa/m for both ScCO(2) and N(2) processes, which is much lower than the 100 MPa/m for the water flooding cases. Comprehensive comparison shows that ScCO(2) shows great advantages in the application of unconventional reservoirs. It is expected that our research work could enrich the investigations of CO(2) flooding and the in-depth understanding of the mechanisms and better guide the utilization of CO(2).