Abstract
This paper presents a distributed vibration control method using attachable absorbers for micro-vibration control of large space payload structures. The distributed vibration control system is modeled at three levels. The simplification of the attachable absorber model is discussed, and the single-channel ANC controller is extended to a multi-channel configuration. Based on the models, simulation analysis is conducted, revealing that the voltage-force output of the absorber in the low-frequency range can be simplified to a second-order system. During the distributed vibration control system simulation, a Simulink-GA hybrid optimization is applied to address the large number of converging parameters. The optimized parameters successfully control the vibration of all channels. Further analysis indicates that the coupling between control channels slightly reduces convergence speed but has no impact on the final control effect. Additionally, the control system can achieve the same results by independently tuning parameters for each channel. The experimental results, using absorber prototypes and a model with 12 sub-mirror structures, demonstrate that the method can control sub-mirror vibrations simultaneously, maintaining the flatness of the main mirror under disturbance, with a 90% reduction in vibration within 4 s. The coupling effect reduces the final convergence speed by approximately 10%, with a time difference of around 1 s.