Design and Analysis of a Continuously Tunable Low Noise Amplifier for Software Defined Radio

用于软件定义无线电的连续可调谐低噪声放大器的设计与分析

阅读:1

Abstract

This paper presents the design and analysis of a continuously tunable low noise amplifier (LNA) with an operating frequency from 2.2 GHz to 2.8 GHz. Continuous tuning is achieved through a radio frequency impedance transformer network in the input matching stage. The proposed circuit consists of four stages, namely transformer stage, tuning stage, phase shifter and gain stage. Frequency tuning is controlled by varying output current through bias voltage of tuning stage. The circuit includes an active phase shifter in the feedback path of amplifier to shift the phase of the amplified signal. Phase shift is required to further achieve tunability through transformer. The LNA achieves a maximum simulated gain of 18 dB. The LNA attains a perfect impedance match across the tuning range with stable operation. In addition, it achieves a minimum noise figure of 1.4 dB.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。