Abstract
We have demonstrated the first continuous-scan electrical substitution Fourier transform spectrometer (ES-FTS), which serves initially as an apparatus for absolute spectral responsivity calibrations of detectors over the wavelength range from 1.5 µm to 11 µm. We present data on the realization of a spectral detector-comparator system with high accuracy, high dynamic range, high spectral resolution and fast measurement in the infrared region, which is tied directly to an absolute power scale through electrical substitution. The ES-FTS apparatus employs a commercial Fourier transform spectrometer and a custom electrical substitution bolometer detector to enable spectrally-resolved absolute optical power measurements. A generalization of electrical substitution techniques enables determination of the voltage waveform that must be applied to the bolometer's electrical heater to cancel the optical signal from a Michelson interferometer in order to quantify the time-dependent optical power incident on the bolometer. The noise floor of the electrical substitution bolometer is on the order of 10 pW/Hz(½) and its response is expected to be linear from the noise floor to 1 mW. A direct comparison between a pyroelectric standard detector and the ES-FTS has been performed, and experimental results reported here show great potential for this technique.