Abstract
In this study, an existing ternary membrane system based on nonsolvent-induced phase separation (NIPS) with a phase-field model was optimized. To study and analyze the effects of different additives on the formation of the skin layer and the effects of the three solvents on membrane characterization under the same conditions, two-dimensional simulations of the relevant parameters of a poly(vinylidene fluoride) (PVDF) membrane system were performed. The specific application of quaternary substances in ternary membrane systems was elaborated by determining the cohesive energy density between the additives and solvents, followed by the interaction parameters χ under the joint effect of the two. The results showed that the PVDF microporous membrane formed a dense surface layer at the mass transfer exchange interface, and with an increase in the poly(ethylene glycol) (PEG) concentration, the phase separation of the skin layer was predominantly transformed from liquid-solid partitioning to liquid-liquid partitioning; the number of membrane pores increased with increasing poly(vinylpyrrolidone) (PVP) concentration. The N,N-dimethylacetamide (DMAc) solvent system had the most stable thermodynamic properties; the dimethyl sulfoxide (DMSO) solvent system had mostly large pores running through the membrane and exhibited a porous structure. Related experiments also validated the model. Therefore, this model can be applied to other PVDF ternary membrane systems to better understand the structural development of microporous PVDF membranes under different conditions.