Hardware-in-the-Loop Simulations with Umbra Conditions for Spacecraft Rendezvous with PMD Visual Sensors

利用PMD视觉传感器进行航天器交会的暗影条件下的硬件在环仿真

阅读:1

Abstract

This paper addresses the validation of a robust vision-based pose estimation technique using a Photonic Mixer Device (PMD) sensor as a single visual sensor in the close-range phase of spacecraft rendezvous. First, it was necessary to integrate the developed hybrid navigation technique for the PMD sensor into the hardware-in-the-loop (HIL) rendezvous system developed by the German Aerospace Center (DLR). Thereafter, HIL tests were conducted using the European Proximity Operation Simulator (EPOS) with sun simulation and in total darkness. For the future missions with an active sensor, e.g., a PMD camera, it could be useful to use only its own illumination during the rendezvous phase in penumbra or umbra, instead of additional flash light. In some tests, the rotational rate of the target object was also tuned. Unlike the rendezvous tests in other works, here we present for the first time closed-loop approaches with only depth and amplitude images of a PMD sensor. For the rendezvous tests in the EPOS laboratory, the Argos3D camera was used at the range of 8 to 5.5 m; the performance showed promising results.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。