Abstract
MXenes are a new family of two-dimensional (2D) nanomaterials. They are inorganic compounds of metal carbides/nitrides/carbonitrides. Titanium carbide MXene (Ti3C2-MXene) was the first 2D nanomaterial reported in the MXene family in 2011. Owing to the good physical properties of Ti3C2-MXenes (e.g., conductivity, hydrophilicity, film-forming ability, elasticity) various applications in wearable sensors, energy harvesters, supercapacitors, electronic devices, etc., have been demonstrated. This paper presents the development of a piezoresistive Ti3C2-MXene sensor followed by experimental investigations of its dynamic response behavior when subjected to structural impacts. For the experimental investigations, an inclined ball impact test setup is constructed. Stainless steel balls of different masses and radii are used to apply repeatable impacts on a vertical cantilever plate. The Ti3C2-MXene sensor is attached to this cantilever plate along with a commercial piezoceramic sensor, and their responses for the structural impacts are compared. It is observed from the experiments that the average response times of the Ti3C2-MXene sensor and piezoceramic sensor are 1.28±0.24μs and 31.19±24.61μs, respectively. The fast response time of the Ti3C2-MXene sensor makes it a promising candidate for monitoring structural impacts.