Abstract
As incrementally formed sheets show large geometric deviations resulting from the deflection of the forming tool, an in-process measurement of the tool tip position is required. In order to cover a measuring volume of 2.0 m × 1.0 m × 0.2 m and to achieve measuring uncertainties of less than 50 µm, a multi-sensor system based on triangulation is realized. Each shadow imaging sensor in the multi-sensor system evaluates the direction vector to an LED attached to the tool, and the three-dimensional position of the LED is then determined from the combination of two sensors. Experimental results show that the angle of view from the sensor to the LED limits both the measurement range and the measurement uncertainty. The measurement uncertainty is dominated by systematic deviations, but these can be compensated, so that the measurement uncertainty required for measuring the tool tip position in the ISF is achieved.