Abstract
The utilization of waste generated by natural resources is a crucial problem nowadays. The current study describes the utilization of pineapple (Ananas comosus) crown residue husk (PCRh) as a strength additive for low-density polyethylene (LDPE) and ethylene propylene rubber (EPR) composites. The blend composites with 30% husk, 10 wt % EPR, and 60% LDPE content showed much better mechanical properties, such as tensile strength and flexural properties, than pristine LDPE and its binary composite with 10 wt % EPR. The high tensile strength (∼19.28 MPa) and tensile modulus (522.97 MPa) were obtained for the composite consisting of 30 wt % PCRh in the basic polymer matrix. Similarly, the highest flexural strength (∼18.09 MPa) and modulus (∼790.29 MPa) were recorded for the same composition. The incorporation of PCRh with LDPE and EPR was further characterized by attenuated total reflection-Fourier transform infrared, differential scanning calorimetry, field emission scanning electron microscopy, dynamic mechanical analysis, and a universal testing machine to evaluate its impact on various properties.