Abstract
Pesticides that protect crops from insects and other pests are some of the main causes of water pollution. Imidacloprid (IMC) is the most widely used insecticide in the world and should be removed from the environment. This work aims to prepare mesoporous nanocomposites to increase the photodegradation efficiency of IMC. To improve the surface properties and enhance the photocatalytic activity, mesoporous nanocomposites with different weight ratios of graphite carbon nitride (CN = 125, 250, and 500 mg) were prepared by the solvothermal method. Mesoporous NH2-MIL-88b(Fe)/graphite carbon nitride (CN = 250 mg, NH2-MCN-2) nanocomposites showed the best photocatalytic performance. To save the time and cost of the experiments, central composite design (CCD) and response surface methodology (RSM) were used and the results were obtained as the initial concentration of IMC (20 mg L-1), amount of photocatalyst (0.76 g L-1), pH = 5, and degradation time ∼46 min. The maximum photocatalytic degradation efficiency estimated by the model was obtained at 96.31%, which is very close to the actual value of 95.47%. The mesoporous NH2-MCN-2 nanocomposite showed excellent stability and suitable reusability with a maximum degradation of 84.5% after five cycles. Results obtained from kinetic studies indicated a rate constant value of 0.08 min-1, and isotherm models showed that equilibrium data are more consistent with the Langmuir model in photocatalytic degradation. Electrochemical experiments showed significant improvement in the electron transfer rate and photocatalytic activity of the mesoporous NH2-MCN-2 nanocomposite. Different trapping agents were used to investigate the effective active species in IMC photodegradation, and it was determined that the hole (h+) and OH radical (•OH) play the main role. The possible mechanism for IMC photocatalytic degradation was suggested by Mott-Schottky (M-S) electrochemical impedance.