Design and Implementation of a Wave Measurement System Based on Millimeter-Wave Radar Array

基于毫米波雷达阵列的波浪测量系统的设计与实现

阅读:1

Abstract

Ocean waves are created by energy passing through water, causing it to move in a circular motion and have a crucial impact on the safety of ship navigation, offshore engineering construction, and marine disaster early warning. Therefore, developing high-precision, real-time wave observation technology to accurately obtain wave parameters is very important. This study employs a One-Vertical-Two-Inclined Millimeter-Wave Radar Array (1V2I-MMWRA) to observe wave parameters in the South China Sea. Based on the measured displacement time series, significant wave height, mean wave height, significant wave period, and mean wave period were estimated using both the zero-crossing method and spectral estimation. The system performance was validated against an air-sea interface flux buoy. Experimental results demonstrate that the zero-crossing method exhibits superior precision. The Root-Mean-Square Errors (RMSEs) for the aforementioned parameters were 0.13 m, 0.11 m, 0.81 s, and 0.46 s, respectively. In contrast, spectral estimation yielded higher RMSEs of 0.20 m, 0.16 m, 1.07 s, and 0.74 s, primarily attributed to increased deviations during typhoon passage. Furthermore, directional spectrum analysis reveals that peak frequency and Power Spectral Density (PSD) intensify with the strengthening of the typhoon, while estimated wave directions align closely with in situ measurements. These findings confirm the high reliability of the 1V2I-MMWRA under extreme conditions, highlighting its distinct advantages of lower power consumption and ease of deployment.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。