Abstract
In this article, we summarize our investigations on optimized 248 nm deep ultraviolet (UV) fabrication of highly stable epoxy polymer Bragg grating sensors and their application for biomedical purposes. Employing m-line spectroscopy, deep UV photosensitivity of cross-linked EpoCore thin films in terms of responding refractive index change is determined to a maximum of Δn = + (1.8 ± 0.2) × 10-3. All-polymer waveguide Bragg gratings are fabricated by direct laser irradiation of lithographic EpoCore strip waveguides on compatible Topas 6017 substrates through standard +1/-1-order phase masks. According near-field simulations of realistic non-ideal phase masks provide insight into UV dose-dependent characteristics of the Bragg grating formation. By means of online monitoring, arising Bragg reflections during grating inscription via beforehand fiber-coupled waveguide samples, an optimum laser parameter set for well-detectable sensor reflection peaks in respect of peak strength, full width at half maximum and grating attenuation are derived. Promising blood analysis applications of optimized epoxy-based Bragg grating sensors are demonstrated in terms of bulk refractive index sensing of whole blood and selective surface refractive index sensing of human serum albumin.