Abstract
The aim of this study was to produce texturized vegetable proteins (TVPs) from faba bean protein via low-moisture extrusion. The effect of extrusion variables including temperature (110, 125, and 140 °C at the die), feed moisture content (30, 35, and 40%), and screw speed (200, 300, and 400 rpm) on the TVP properties were investigated. An increase in feed moisture content or extruder temperature reduced the specific mechanical energy and torque by 40-45% during extrusion. An increase in feed moisture created TVPs with lower bulk densities and rehydration ratios while an increase in extruder temperature or screw speed increased the bulk density of the TVPs. An increase in screw speed also caused a decrease in the water holding capacity of the milled TVP flours. The TVP flours had a 33-70% higher oil holding capacity than the raw material. The texture profile showed that an increase in feed moisture influenced TVP hardness, gumminess, and chewiness with higher values compared to the treatments with lower moisture contents. Springiness, cohesiveness, and resilience were more affected by a change in screw speed with higher values at 200 rpm. The best parameters were selected (125 °C, 40% MC, 300 rpm) to produce TVP to use as a partial (hybrid burger) and complete (vegan burger) replacement of beef in a burger patty. The replacement of 25% beef with TVPs in a hybrid burger increased the cooking yield and moisture retention and decreased the thickness and diameter change compared to the beef burger without TVPs. In a vegan formulation, the faba bean TVP burger had lower cooking yield and moisture retention than commercial products.