Influence of Solid Alkaline Photocatalysts Irradiated with UV Light on Fuel Properties of Palm Oil Biodiesel

紫外光照射下固体碱性光催化剂对棕榈油生物柴油燃料性能的影响

阅读:1

Abstract

TiO(2) nanoparticles are full of porosity that can be impregnated with a strong alkaline catalyst CH(3)ONa to form a TiO(2)/CH(3)ONa catalyst. TiO(2) of the anatase phase, which is a semiconductor material, has been a prominent photocatalyst due to its excited photocatalyst activity, chemical and biological stability, and nontoxicity. The CH(3)ONa compound has been widely used as a catalyst for transesterification. Although the synthesized photocatalyst TiO(2) powder with CH(3)ONa is anticipated to greatly enhance the transesterification efficiency, leading to improving biodiesel properties, relevant studies have not been found. After the photocatalyst was prepared, a reactant mixture of palm oil, methanol, and heterogeneous catalyst TiO(2)/CH(3)ONa was illuminated by ultraviolet (UV) light from light-emitting diode (LED) lamps. The experimental results revealed that the formation of fatty acid methyl esters was significantly increased to 98.4% with ultraviolet-light illumination for the molar ratio of methanol/palm oil equal to 6 and 3 wt % catalyst addition. The decrease of the catalyst amount to 2 wt % resulted in a slight decrease of the fatty acid methyl esters to 97.06 wt %. The lowest kinematic viscosity and acid value and the highest distillation temperature, heating value, and cetane index were observed under the above reaction conditions. The distillation temperature and cetane index were increased while the acid value was decreased under ultraviolet illumination on the reactant mixture. Consequently, the optimum preparing conditions for biodiesel production were 6 and 3 wt % for the molar ratio of methanol/palm oil and catalyst addition under UV-light irradiation.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。