Abstract
Rural communities in Mexico and other countries with limited economic resources require a low-cost measurement system for the piezometric level and temperature of groundwater for their sustainable management, since anthropogenic action (pumping extractions), natural recharge and climate change phenomena affect the behavior of piezometric levels in the aquifer and its sustainability is at risk. Decrease in the piezometric level under a balanced level promotes salt intrusion from ocean water to the aquifer, salinizing and deteriorating the water quality for agriculture and other activities; and a decrease in water level under the pumps or well drilling depth could deprive communities of water. Water temperature monitoring is essential to determine electric conductivity and dissolved salt content in groundwater. Using IoT technology, a device was developed that monitors both variables inside the well, and the ambient temperature and atmospheric pressure outside the well. The measurements are made in real time, with sampling every second and sending data to a dedicated server every 15 min so that the visualization can be accessed through a device with Internet access. The time series of the variables measured inside and outside the well were obtained over a period of three months in the rural community of Agua Blanca, Guasave, Sinaloa, Mexico. Through these records, a progressive temporary drawdown of the piezometric level is observed, as well as the frequency of pumping. This low-cost IoT system shows potential use in hydrological processes of interest such as the separation of regional and local flow, drawdown rates and recognition of geohydrological parameters.