Abstract
This article provides insights in designing a dielectrically modulated biosensor by adopting high-k stacked gate oxide proposition in a bi-metal hetero-juncture Tunnel Field Effect Transistor (BM-SO-HTFET) with Si0.6Ge0.4 source. The integrated effect of heterojunction and stacked gate oxide leads to enhanced electrical performance of the proposed device in terms of carrier mobility and suppressed leakage current. Nano-cavity engraved beneath the bi-metal gate structure across the source/channel end acts the binding site of the biomolecules to be detected. This Configuration leads to improved control of biomolecules over source/channel tunnelling rate and the same is reflected in the sensing ability of the device while extracting the ON current sensitivity (SON) of the sensor. The reported biosensor is simulated using Silvaco ATLAS calibrated simulation framework. The analysis of the device sensitivity is carried out varying dielectric constants (k) of various biomolecules, both neutral as well as charged. Our study reveals that BM-SO-HTFET with Ge mole fraction composition x = 0.4 exhibits sensitivity as high as 4.1 × 1010 for neutral biomolecules and 3.2 × 1011 for positively charged biomolecules with k = 12. Furthermore, a transient response profile for the drain current with various biomolecules is explored to determine the varying settling time. From the simulation results, it is noted that BM-SO-HTFET exhibits ON current sensitivity of 4.1 × 1010 and 3.2 × 1011 for neutral and charged biomolecules respectively. In addition to this, for highly sensitive and real time detection of biomolecules, the impact of temperature and certain non-ideal factors drifting from ideal case of fully filled cavity have also been considered to analyze its optimum sensing performance.