Abstract
Rice bran, rich in feruloyl arabinoxylan, is a good source of feruloyl oligosaccharides (FOs). To prepare FOs, bran was often hydrolyzed by amylase and protease to remove starch and protein and then hydrolyzed by xylanase, which was time-consuming and had a low yield. To solve the above problems, enzymatic extrusion was used to treat rice bran, and the effects of traditional hydrolysis, a combination of traditional extrusion and hydrolysis (extrusion-hydrolysis) and enzymatic extrusion on the yield of FOs were investigated and compared in this study. It was found that traditional extrusion and enzymatic extrusion significantly increased the yield of FOs. Particularly, the yield of FOs resulting from enzymatic extrusion was increased to 5.78%, while the yield from traditional hydrolysis was 4.23%. Microscopy analysis showed that extrusion damaged the cell wall of bran, which might increase the accessibility of xylanase to arabinoxylan and the yield of FOs. Spectroscopy analysis suggested that FOs obtained by different pretreatments had similar structures. It was obvious that enzymatic extrusion saved the time for removal of starch and protein and increased the yield of FOs. In addition, the highest yield of FOs was found at the moisture content of 30% and the screw speed of 50 rpm. This study provided an efficient method for the preparation of FOs that is suitable for industrial production.