Design and implementation of single switch integrated boost and flyback converter for renewable and sustainable energy

用于可再生能源和可持续能源的单开关集成升压反激转换器的设计与实现

阅读:1

Abstract

Renewable resources are being explored to meet the increasing energy demand in the world. The development of RES and their integration into the grid necessitate a voltage conversion to match with the grid voltage. This conversion can be implemented using DC-DC converters. A high-gain DC-DC Converter with low loss is proposed in this article. Thus, the proposed integrated converter is obtained by incorporating a boost converter at the primary side of the flyback converter (FLC) and a VM cell at the secondary side to perform a elevated voltage gain at a lower duty ratio. The Switched Capacitor network is implemented to elevate the voltage gain. The dynamic performance of a controller can be enhanced using an FOPID controller. A comparison analysis has been done using the most recent topologies in order to confirm the superiority of the Proposed converter. A 100W experimental prototype model has been constructed in order to further validate the simulation results. The efficiency of this converter is demonstrably significantly higher than the current topology, according to measured performance. Therefore, it can be said that this topology can be used for applications involving renewable and sustainable energy.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。