Abstract
Detection and sequestration of chemical warfare agents (CWAs), such as poisonous organophosphates, are highly desirable for both personal security and environmental protection. However, both sensing and absorption in a single device have been rarely reported. In this study, we describe a photonic absorbent based on a cholesteric liquid crystal polymer as a dual sensing and decontamination device for gas-type CWAs. Dimethyl methylphosphonate (DMMP) was used as a simulant compound. A blue reflective photonic polymer was fabricated that was able to detect DMMP vapor through absorption. Hydrogen bond interactions between DMMP and mesogenic carboxylic groups of the polymer allow selectivity and capture. A distinct optical change of the film from blue to bright green indicates the absorption of DMMP vapor molecules and confirms when full absorption of the polymer is achieved. The diffusion of DMMP vapor into the material was observed by the formation of a sharp boundary between swollen and unswollen material, as evidenced by scanning electron microscopy images and the structural color changes. In ambient conditions, DMMP molecules are retained in the photonic absorbent without release to the environment. Heating above approximately 60 °C releases the absorbed DMMP, leading to a reusable optical device. These results confirm the ability of photonic polymers to sense and immobilize dangerous vapor, paving the way for the realization of simple, battery-free optical devices able to simultaneously warn and protect.