Abstract
As the number of devices using wireless communications increases, the amount of usable radio frequency spectrum becomes increasingly congested. As a result, the need for robust, adaptive communications to improve spectral efficiency and ensure reliable communication in the presence of interference is apparent. One solution is using beamforming techniques on digital phased-array receivers to maximize the energy in a desired direction and steer nulls to remove interference; however, traditional phased-array beamforming techniques used for interference removal rely on perfect calibration between antenna elements and precise knowledge of the array configuration. Consequently, if the exact array configuration is not known (unknown or imperfect assumption of element locations, unknown mutual coupling between elements, etc.), these traditional beamforming techniques are not viable, so a beamforming approach with relaxed requirements (blind beamforming) is required. This paper proposes a novel blind beamforming approach to address complex narrowband interference in spectrally congested environments where the precise array configuration is unknown. The resulting process is shown to suppress numerous interference sources, all without any knowledge of the primary signal of interest. The results are validated through wireless laboratory experimentation conducted with a two-element array, verifying that the proposed beamforming approach achieves a similar performance to the theoretical performance bound of receiving packets in additive white Gaussian noise (AWGN) with no interference present.