Abstract
The problem of calibrating phased array antennas in a noisy environment using an autocorrelation algorithm is investigated and a mathematical model of the autocorrelation calibration method is presented. The proposed calibration system is based on far-field scanning of the phased array antenna in an environment with internal noise and external interference. The proposed method is applied to a phased array antenna and compared with traditional rotating-element electric-field vector methods, which involve identifying the maximum and minimum vector-sum points (REVmax and REVmin, respectively). The proposed calibration system is verified for a phased array antenna at 3 GHz. Experimental verification of the mathematical model of the proposed method demonstrates that the autocorrelation method is more accurate than the rotating-element electric-field vector methods in determining the amplitude and phase shifts. The measured peak gain of the combined beam in the E-plane increased from 7.83 to 8.37 dB and 3.57 to 4.36 dB compared to the REVmax and REVmin methods, respectively, and the phase error improved from 47° to 55.48° and 19.43° to 29.16°, respectively. The proposed method can be considered an effective solution for large-scale phase calibration at both in-field and in-factory levels, even in the presence of external interference.