Abstract
Using hot air drying (HAD) and combined infrared hot air drying (IR-HAD) test devices, the drying kinetics, unit energy consumption, color difference values, rehydration rate, microstructure, and changes in polysaccharide and allantoin contents of yam slices were examined at various temperatures (50 °C, 55 °C, 60 °C, 65 °C, and 70 °C). The findings demonstrated that each of the aforementioned parameters was significantly impacted by the drying temperature. IR-HAD dries quicker and takes less time to dry than HAD. The D(e)(ff) of IR-HAD is higher than that of HAD at the same temperature and increases with the increase in temperature. The activation energy required for IR-HAD (26.35 kJ/mol) is lower than that required for HAD (32.53 kJ/mol). HAD uses more energy per unit than IR-HAD by a factor of greater than 1.3. Yam slices treated with IR-HAD had higher microscopic porosity, better rehydration, lower color difference values, and higher polysaccharide and allantoin levels than HAD-treated yam slices. The IR-HAD at 60 °C had the greatest comprehensive rating after a thorough analysis of the dried yam slices using the coefficient of variation method. Three statistical indicators were used to evaluate six thin-layer drying models, and the Weibull model was most applicable to describe the variation of drying characteristics of yam slices.