Abstract
Several approaches have been used in the past to predict fatigue crack growth rates in T-joints of the offshore structures, but there are relatively few cases of applying structural health monitoring during the non-destructive testing of jacket platforms. This paper presents an experimental method based on the sensing of the piezoelectric sensors and finite element analysis method for studying the fatigue cracks in the offshore steel jacket structure. Three types of joints are selected in the current research work: T-type plate, T-type tube-plate, and T-type tube joints. The finite element analysis model established in the current study computes and analyzes the high stress and high strain regions in the T-type joints. The fatigue damage in the T-type joints was successfully detected by utilizing both the finite element analysis and experimental methods. The results showed that fatigue cracks of the three types of joints are prone to appear at the weld toe and spread in the welding direction. The fatigue damage location of T-type plate and T-type tube-plate joints is more concentrated in the upper weld toe area, and the fatigue damage location of the T-type tube joint is closer to the lower weld toe area.