日期 影响因子
日期:
2020 年 — 2026 年
2020
2021
2022
2023
2024
2025
2026
影响因子:
–

Dimensional Stability of SLA 3D-Printed Surgical Guide Resin After Steam Sterilization (121 °C and 134 °C) and Isopropyl Alcohol Disinfection: An In Vitro Study

SLA 3D打印手术导板树脂经蒸汽灭菌（121℃和134℃）和异丙醇消毒后的尺寸稳定性：一项体外研究

期刊:Dentistry Journal
影响因子:3.1
doi:10.3390/dj14040204
Sîrbu, Ioan; Custura, Andreea; Radu, Adelin; Vasilescu, Vlad Gabriel; Nastasie, Vladimir; Antoniac, Vasile Iulian; Miculescu, Marian; Șișman, Adrian Ionut; Sîrbu, Valentin
3D/类器官
发表日期：2026
文献求助 收藏

In Vitro Evaluation of Surface and Mechanical Behavior of 3D-Printed PMMA After Accelerated and Chemical Aging Under Simulated Oral Conditions

在模拟口腔条件下，对3D打印PMMA材料经加速老化和化学老化后的表面和力学性能进行体外评价

期刊:Dentistry Journal
影响因子:3.1
doi:10.3390/dj14010040
Vasilescu, Vlad-Gabriel; Ciocoiu, Robert Cătălin; Custură, Andreea Mihaela; Ciocan, Lucian Toma; Miculescu, Marian; Antoniac, Vasile Iulian; Țâncu, Ana-Maria Cristina; Imre, Marina; Pițuru, Silviu Mirel
3D/类器官
衰老
多发性骨髓瘤
发表日期：2026
文献求助 收藏

In Vitro Studies Regarding the Effect of Cellulose Acetate-Based Composite Coatings on the Functional Properties of the Biodegradable Mg3Nd Alloys

体外研究醋酸纤维素基复合涂层对可生物降解Mg3Nd合金功能特性的影响

期刊:Biomimetics
影响因子:3.9
doi:10.3390/biomimetics8070526
Streza, Alexandru; Antoniac, Aurora; Manescu Paltanea, Veronica; Ciocoiu, Robert; Cotrut, Cosmin-Mihai; Miculescu, Marian; Miculescu, Florin; Antoniac, Iulian; Fosca, Marco; Rau, Julietta V; Dura, Horatiu
发表日期：2023
文献求助 收藏

Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications

生物医学应用中3D打印复合材料丝材开发中前驱体材料的选择路径

期刊:Materials
影响因子:3.2
doi:10.3390/ma16062359
Mocanu, Aura-Cătălina; Miculescu, Florin; Constantinescu, Andreea Elena; Pandele, Mădălina-Andreea; Voicu, Ștefan Ioan; Cîmpean, Anișoara; Miculescu, Marian; Negrescu, Andreea Mariana
3D/类器官
发表日期：2023
文献求助 收藏

Fluoride Treatment and In Vitro Corrosion Behavior of Mg-Nd-Y-Zn-Zr Alloys Type

氟化物处理及Mg-Nd-Y-Zn-Zr合金的体外腐蚀行为

期刊:Materials
影响因子:3.2
doi:10.3390/ma15020566
Quan, Pham Hong; Antoniac, Iulian; Miculescu, Florin; Antoniac, Aurora; Păltânea, Veronica Manescu; Robu, Alina; Bița, Ana-Iulia; Miculescu, Marian; Saceleanu, Adriana; Bodog, Alin Dănuț; Saceleanu, Vicentiu
发表日期：2022
文献求助 收藏

Magnesium-Based Alloys Used in Orthopedic Surgery

骨科手术中使用的镁基合金

期刊:Materials
影响因子:3.2
doi:10.3390/ma15031148
Antoniac, Iulian; Miculescu, Marian; Mănescu Păltânea, Veronica; Stere, Alexandru; Quan, Pham Hong; Păltânea, Gheorghe; Robu, Alina; Earar, Kamel
发表日期：2022
文献求助 收藏

Failure Analysis of Ultra-High Molecular Weight Polyethylene Tibial Insert in Total Knee Arthroplasty.

全膝关节置换术中超高分子量聚乙烯胫骨垫片的失效分析

期刊:Materials
影响因子:3.2
doi:10.3390/ma15207102
Manescu Paltanea Veronica, Antoniac Iulian, Antoniac Aurora, Paltanea Gheorghe, Miculescu Marian, Bita Ana-Iulia, Laptoiu Stefan, Niculescu Marius, Stere Alexandru, Paun Costel, Cristea Mihai Bogdan
骨科研究
发表日期：2022
文献求助 收藏

Regulation and Certification of (Bio)Medical Engineers: A Case Study on Romania

（生物）医学工程师的监管与认证：以罗马尼亚为例

期刊:International Journal of Environmental Research and Public Health
影响因子:
doi:10.3390/ijerph19159004
Miculescu, Marian; Ion, Oana Andreea
发表日期：2022
文献求助 收藏

Preliminary Studies on Graphene-Reinforced 3D Products Obtained by the One-Stage Sacrificial Template Method for Bone Reconstruction Applications

利用单阶段牺牲模板法制备石墨烯增强三维产品的初步研究及其在骨重建中的应用

期刊:Journal of Functional Biomaterials
影响因子:5.2
doi:10.3390/jfb12010013
Mocanu, Aura-Cătălina; Miculescu, Florin; Stan, George E; Ciocoiu, Robert-Cătălin; Corobea, Mihai Cosmin; Miculescu, Marian; Ciocan, Lucian Toma
发表日期：2021
文献求助 收藏

Advanced Composite Biomaterials

先进复合生物材料

期刊:Materials
影响因子:3.2
doi:10.3390/ma14030625
Voicu, Stefan Ioan; Miculescu, Marian
发表日期：2021
文献求助 收藏