Abstract
The role of solvents is crucial in catalyst preparation. With regard to catalysts prepared with activated carbon (AC) as the carrier, when water is used as a solvent it is difficult for the solution to infiltrate the AC. Because AC comprises a large number of C atoms and is a nonpolar material, it is more effective for the adsorption of nonpolar substances. Since the water and active ingredients are polar, they cannot easily infiltrate AC. In this study, the dispersion of the active component was significantly improved by optimizing the solvent, and the particle size of the active component was reduced from 33.08 nm to 15.30 nm. The specific surface area of the catalyst is significantly increased, by 10%, reaching 991.49 m(2)/g. Under the same reaction conditions, the conversion of acetic acid by the catalyst prepared with the mixed solvent was maintained at approximately 65%, which was 22% higher than that obtained using the catalyst prepared with water as the solvent.