Abstract
Smart wearable devices are extensively utilized across diverse domains due to their inherent advantages of flexibility, portability, and real-time monitoring. Among these, flexible sensors demonstrate exceptional pliability and malleability, making them a prominent focus in wearable electronics research. However, the implementation of flexible wearable sensors often entails intricate and time-consuming processes, leading to high costs, which hinder the advancement of the entire field. Here, we report a pressure and proximity sensor based on oxidized laser-induced graphene (oxidized LIG) as a dielectric layer sandwiched by patterned LIG electrodes, which is characterized by high speed and cost-effectiveness. It is found that in the low-frequency range of fewer than 0.1 kHz, the relative dielectric constant of the oxidized LIG layer reaches an order of magnitude of 104. The pressure mode of this bimodal capacitive sensor is capable of detecting pressures within the range of 1.34 Pa to 800 Pa, with a response time of several hundred milliseconds. The proximity mode involves the application of stimulation using an acrylic probe, which demonstrates a detection range from 0.05 mm to 37.8 mm. Additionally, it has a rapid response time of approximately 100 ms, ensuring consistent signal variations throughout both the approach and withdrawal phases. The sensor fabrication method proposed in this project effectively minimizes expenses and accelerates the preparation cycle through precise control of laser processing parameters to shape the electrode-dielectric layer-electrode within a single substrate material. Based on their exceptional combined performance, our pressure and proximity sensors exhibit significant potential in practical applications such as motion monitoring and distance detection.