Development of an ultrafast laser system based on a Yb-doped fiber and a Yb:YAG thin-rod for the preclinical study of pigmented lesions treatment using a Hartley guinea pig

利用哈特利豚鼠,开发了一种基于掺镱光纤和Yb:YAG细棒的超快激光系统,用于色素性病变治疗的临床前研究。

阅读:1

Abstract

In this research, we developed an ultrafast laser system based on a Yb-doped fiber oscillator and Yb:YAG thin-rod amplifier to investigate the efficacy of the laser for the treatment of pigmented lesions. The developed laser exhibited an output power of 22.7 W, center wavelength of 1030 nm, repetition rate of 495 kHz, pulse energy of 45.9 µJ, and pulse duration of 1.56 ps, respectively. For a compact and stable chirped pulse amplification system, a chirped fiber Bragg grating (CFBG) stretcher and a chirped volume Bragg grating (CVBG) compressor, both with fixed dispersion, were used. The dispersion of the total laser systems was precisely compensated by adjusting the length of the passive fiber and utilizing the self-phase modulation effect of the fiber amplifier. The developed ultrafast laser system was then applied in preclinical studies for the treatment of pigmented lesions in a guinea pig model. Three colored squares, each measuring approximately 15 × 15 mm, were treated by scanning a focused beam with varying laser fluences ranging from 0.5 to 2 J/cm(2), using wavelengths of 515 nm and 1030 nm. The colorimeter measurements, which were performed 1-5 weeks after laser treatment, indicated that the laser was effective in reducing pigment, particularly black and blue pigments at higher fluences. This research represents the first trial of a preclinical study on pigmented lesions using an ultrafast laser system with a pulse duration below 10 ps, shorter than the stress relaxation time of 10 nm melanin granules. The results are meaningful as they offer valuable insights into the effectiveness of ultrafast laser therapy.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。