Abstract
This study investigated the effects of various plasticizer types [glycerol (GLY), sorbitol (SOR), and polyethylene glycol (PEG)] on the properties of fish myofibrillar protein (FMP) film. FMP films plasticized with GLY showed the greatest elongation at break (116.53%). It also showed the greatest water vapor permeability (1.43 × 10(-10) g m(-1) s(-1) Pa(-1)). The film plasticized with SOR exhibited the highest tensile strength (12.56 MPa) and film solubility (62.59%). PEG plasticized film showed to have yellowish colour as indicated by the high b* value and low light transmission at 280 nm. Furthermore, FMP films containing PEG and SOR possessed lower moisture content than films with GLY. FT-IR and electrophoretic properties were not affected by any types of plasticizer. The appearance of the FMP film was similar to that of the PVC film. It was concluded that plasticizers had major effects on FMP films. They not only plasticize the protein film, but also affected other major film properties.