Abstract
The effects of extrusion process parameters on the physicochemical, pasting and technological properties of ready-to-eat snacks were evaluated. The aim was to develop fortified extruded products with fig molasses by-product powder (FMP), which is created as a result of the production of fig molasses, is not currently used in food industry, and may cause environmental problems. The feed humidity was changed to 14-17-20%, the die temperature was 140-160-180 °C and the ratio of FMP was 0-7-14% at a fixed screw speed of 325 rpm. The study showed that adding FMP to extruded products had a significant effect on colour properties, water solubility and water absorption index properties. İncreasing the FMP ratio had a significant reducing effect on dough properties of non-extruded mixtures such as peak viscosity (PV), final viscosity (FV) and setback viscosity (SB). The optimum conditions for the production of snacks were found to be 7% FMP, 155.44 °C die temperature and 14.69% humidity. It was determined that the estimated values of water absorption index (WAI) and water solubility index (WSI) for the products manufactured under ideal extrusion conditions were close to the obtained values, and that there was no significant difference between the estimated values of the other response variables and their actual values.